A Method for Gain over Temperature Measurements Using Two “Hot” Noise Sources

Authors: Vince Rodriguez and Charles Osborne
Publication: EuCAP 2016
Copyright Owner: IEEE

P Gain over Temperature (G/T) is an antenna parameter of importance in both satellite communications and radio-astronomy. Methods to measure G/T are discussed in the literature [1-3]. These methodologies usually call for measurements outdoors where the antenna under test (AUT) is pointed to the “empty” sky to get a “cold” noise temperature measurement; as required by the Y-factor measurement approach [4]. In reference [5], Kolesnikoff et al. present a method for measuring G/T in an anechoic chamber. In that approach, the chamber has to be maintained at 290 kelvin to achieve the “cold” reference temperature. In this paper, a new method is presented intended for the characterization of lower gain antennas, such as active elements of arrays. The new method does not require a cold temperature reference; thus alleviating the need for testing outside or maintaining a cold reference temperature in a chamber. The new method uses two separate “hot” sources. The two hot sources are created by using two separate noise diode sources of known excess noise ratios (ENR) or by one source and a known attenuation. The key is that the sources differ by a known amount. This paper builds upon the presented information in [2] providing more measured data using the recommended procedure.

View the paper