Planar Near-Field Measurement System 1.5 x 1.5 meters

Specifications

Positioning System
Positioner	MEC-XYV-1.5x1.5 (Vertical Planar with Z and Probe Pol)
Scan Area	1.5 x 1.5 m (5 x 5 ft)
Probe Capacity	7 kg (15 lb)
Planarity	0.075 mm (0.003 in.) RMS 0.05 mm (0.002 in.) RMS with on-site re-cal
Repeatability	X, Y: 0.05 mm (0.002 in.) RMS Z: 0.025 mm (0.001 in.) RMS Pol: 0.03° RMS
Resolution	X, Y: 0.06 mm (0.0025 in.) Z: 0.025 mm (0.001 in.) Pol: 0.0125°
Scan Speed X,Y	X: 0.38 m/s (15 in./sec) Y: 0.76 m/s (30 in./sec)
Position Controller	ELE-IMC (Intelligent Measurement Controller)
Motor Cables	Quick-connect 12.2 m (40 ft)
PC Workstation	Computer with LCD Monitor
Power	500W, 100–240 VAC switchable, 50/60 Hz
Software	NSI2000
Absorber	12.7 cm (5 in.) pyramidal
Frequency Range	1.7–110 GHz
RF System
Scanner RF Cables	20, 40, or 50 GHz, 5.5 m (18 ft) X/Y Cabletrack
Rotary Joint	26.5, 40, or 50 GHz (Pol)
Range RF Cables	20, 40, or 50 GHz 6.1 m (20 ft) to Scanner Base and AUT
RF Receiver	NSI-MI VFA, Keysight PNA, Rohde & Schwarz ZVA
Weights and Dimensions (Scanner Only)
Installed Envelope W x L x H	1.6 x 1.1 x 2.6 m (65 x 43 x 103 in.)
Installed Weight	241 kg (532 lb)
Crated Dimensions W x L x H	2 crates up to 2.6 x 1.1 x 1.0 m (104 x 42 x 38 in.) 1 D container 1.5 x 1.1 x 1.0 m (58 x 42 x 38 in.)

Applications

• Point to Point Communication Antennas
• Phased-Arrays
• Reflector Antennas
• Radar Antennas

Capabilities

The PNF-XYV-1.5x1.5 supports NSI-MI, Keysight, and Rohde & Schwarz RF receivers and is capable of measuring amplitude and phase patterns from L-band to mmWave. The system includes a software workstation preloaded with NSI2000 Antenna Measurement Software and Windows® and provides automatic setup of scans based on measurement parameters and desired output. Measured data can be processed for far-field or holographic patterns yielding complete characterization of the antenna’s performance. A single data set provides information on antenna gain, side lobe structure, beam pointing and cross polarization.

Standard Options

Each NSI-MI Pre-Configured System includes the following:

• Positioning Subsystem including Mechanical Scanner with Absorber Kit and Motion Control System
• State-of-the-art RF Subsystem
• Mounting Hardware Installation Kit
• Full Standard System Interface and Operations Documentation
• Interface Kits to easily integrate a wide variety of common RF equipment, antennas and test devices
• NSI-MI or customer supplied RF receiver connection

---

---

Available Add-Ons

Our Pre-Configured Systems are designed to operate with a wide range of popular accessories and support services to meet budget and test needs. These include:

• Full range of Probes and Standard Gain Horns
• Additional software to enhance productivity
• AUT supports, stands and other accessories
• On-site installation, training and verification by NSI-MI experts
• Interface Kits to easily integrate a wide variety of common RF equipment, antennas and test devices

---

---

---

---

---