The IsoFilterTM Technique: A Method of Isolating the Pattern of an Individual Radiator from Data Measured in a Contaminated Environment
Author: Doren W. Hess
Publication: IEEE Antennas and Propagation Magazine (Volume: 52 , Issue: 1 , Feb. 2010)
Copyright Owner: IEEE
This paper describes a novel method, termed the IsofilterTM Technique, of isolating in the measured data the radiation pattern of an individual radiator from among a composite set of radiators that form a complex radiation distribution. This technique proceeds via three successive steps: A spherical NFFF transform on an oversampled data set, followed by a change of coordinate system followed in turn by filtering in the domain of the spherical modes to isolate a radiating source. The end result is to yield an approximate pattern of the individual radiator largely uncontaminated by the other competing sources of radiation. I.
You have requested a Reprint of an IEEE Paper
Copyright 2010 IEEE. Reprinted from IEEE Antennas and Propagation Magazine (Volume: 52 , Issue: 1 , Feb. 2010).
This material is posted here with permission of the IEEE. Such permission
of the IEEE does not in any way imply IEEE endorsement of any of NSI-MI Technologies' products or services. Internal or personal use of this
material is permitted. However, permission to reprint/republish this
material for advertising or promotional purposes or for creating new
collective works for resale or redistribution must be obtained from the
IEEE by writing to pubs-permissions@ieee.org.
By choosing to view this document, you agree to all provisions of the copyright laws protecting it.