A Review of the CW-Ambient Technique for Measuring G/T in a Planar Near-Field Antenna Range

Authors: Ryan T. Cutshall, Brett T. Walkenhorst, Justin Dobbins, Jacob Freking, Bruce Williams
Publication: AMTA 2019
Copyright Owner: Raytheon

Techniques for measuring G/T have been previously presented at AMTA; however, there are very few papers that discuss how to measure G/T in a near-field antenna range. One recent paper discussed such a method and gave a brief description within the larger context of satellite payload testing [1]. The paper’s treatment of G/T was necessarily brief and gives rise to several questions in relation to the proposed method. Other papers that treated this topic required the antenna aperture to be separable from the back-end electronics, which may not be possible in all cases [2-3]. In this paper, we discuss in great detail a slightly modified version of the G/T measurement method presented in [1]. A signal and noise power diagram is presented that can be useful for understanding how system signal-to-noise ratio (SNR) relates to G/T, and a few common misconceptions concerning the topic of G/T are addressed. The CW-Ambient technique for computing G/T of a Unit Under Test (UUT) from measurements in a planar near-field system is described in detail, and a list of assumptions inherent to the CW-Ambient technique is presented. Finally, the validity of the CW-Ambient technique is assessed by analyzing measured data collected from a separable UUT.

View The Paper

Atlanta

1125 Satellite Blvd., Suite 100
Suwanee, GA 30024-4629 USA

+1 678 475 8300
+1 678 542 2601

Los Angeles

19730 Magellan Drive
Torrance, CA 90502-1104 USA

+1 310 525 7000
+1 310 525 7100

NSI-MI UK

Unit 51 Harley Road
Sheffield, S11 9SE UK

+44 7493 235224
  www.nsi-mi.co.uk

Short Course

Torrance, CA Finding your local time... 42 Days

Latest Tweets

This site is using cookies for analytical purposes and to provide a better user experience. Read our Privacy Policy for more information.