Compact Range Techniques and Measurements
Authors: R. C. Johnson, H. A. Ecker, R. A. Moore
Publication: IEEE Transactions on Antennas and Propagation
Copyright Owner: IEEE
Compact range techniques for measuring the gain patterns of full-size microwave antennas and for making radar reflectivity measurements are described. The basic principle of this technique is the use of a large collimating device to generate a uniform plane wave across the aperture of a target or antenna without requiring the normal far-field separation. Two different collimating devices were used in the investigation, a paraboloid with a point-source feed and a parabolic cylinder with a line-source feed generated by a large hoghorn. Pattern and gain measurements were made on both compact ranges using a 30-inch paraboloidal test antenna, and the measurements were compared with similar ones made on conventional outdoor ranges. Radar cross-section patterns as a function of aspect angle were measured for various size standard targets and compared with theoretically calculable radar cross-section patterns. The results which have been achieved are very encouraging. They demonstrate that the performance of compact ranges at theX-band is comparable to that of outdoor ranges..
You have requested a Reprint of an IEEE Paper
Copyright 1969 IEEE. Reprinted from IEEE Transactions on Antennas and Propagation.
This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of NSI-MI Technologies' products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to pubs-permissions@ieee.org.
By choosing to view this document, you agree to all provisions of the copyright laws protecting it.